My Life Scripture

Philippians 4:4-7 (ESV English Standard Version) Holy Bible
Rejoice in the Lord always; again I will say, Rejoice. Let the reasonableness be known to everyone. The Lord is at hand; do not be anxious about anything, but in everything by prayer and supplication with thanksgiving let your requests be made known to God. And the peace of God, which surpasses all understanding, will guard your hearts and your minds through Christ Jesus.

Thursday, February 27, 2014

A Bouquet of Cards-in-Boxes!

A bouquet of Cards-in-Boxes!  I need several of these easy projects for belated birthdays!
Card-in-a-Box #1
This card and the next two have been 'tweaked' a little by adding extra strips 
at the top of the box to provide more area to add embellishments.
Click the first link for step-by-step directions to create the project.
Click this link to find the instructions to 'tweak' the top!
A variety of flowers, butterflies, and flourish embellishments were used.
Another view of #1
Card-in-a-Box #2
Large pink flower on top from K&Company
Flourishes are Sizzex cutting dies
Small flowers are from K&Company
Pink gems are from Darice, Inc.
Another view of #2
Card-in-a-Box #3
Flowers and Butterflies are from K&Company
Flourishes and extra leaves are Sizzex cutting dies
Another view #3
Thank you for visiting today!

Card-in-a-Box Birthday!

A Birthday Celebration!
My latest Card-in-a-Box!
How cool is this...when I took the picture, the flash caused the candles to appear as if they are lit!
I modified the original instructions for the Card-in-a-Box to add two more strips.

In the original instructions, there were two wide strips attached inside 
the box to hold embellishments.
For the Birthday Card-in-a-Box, I cut the two wider strips in two pieces (creating 4 strips) and made the tabs shorter, then put Tacky Tape on the tabs.
Click link for step-by-step instructions for creating a Card-in-a-Box
Attached strips.
Adding the two additional strips allowed more embellishments to be used.
Closed front of the card (before embellishments are added)
Closed back of card after embellishments.
I took the pictures with my iphone.  I am not able to manipulate the pictures after downloading to my PC.  Lesson learned!!  I must remember to take the photos just as I want them to appear on my blog when using the iphone camera!
Happy Birthday!!

For complete instructions for creating a Card-in-a-Box, click the link...

Saturday, February 15, 2014

Measurement Error Found and Corrected!

Card-in-a-Box Tutorial
There was a measurement error in Step 2!
The error has been corrected!!
Please visit the post again for the corrected measurements.

I found the error when I made another Card-in-a-Box project.

Thursday, February 13, 2014

Card-in-a-Box Tutorial Step-by-Step!

Card-in-a-Box and Card-in-a-Box Box!
Today's post features the step-by-step directions for creating this wonderful paper creation!

The Card-in-a-Box has become a favorite papercrafting project!  I became familiar with this technique during a blog hop and found the instructions on Splitcoast Stampers.  Click the link to find links to the websites and to view my first Card-in-a-Box Project.

Supplies and equipment needed:

Scoreboard (using Martha Stewart)
metal ruler
Paper trimmer
Strong Adhesive tape and liquid glue (using Glossy Accents)

1 sheet 8 1/2" x 12" heavy cardstock
2 pieces coordinated patterned paper
 enough to cut...
(1) 2 1/2" x 6 1/4" inside panel
(3) 2 1/2" x 3 1/2" outside panels
(6) 2 1/2" x 2 1/2" (squares) sides, front (inside and outside)

(1) 2 /12" x 6 1/4" panel of white or light cardstock to be used for sentiment and signature

Step 1     Lay cardstock on scoreboard with long side against the top of the scoreboard.
Step 2     Score the cardstock at 2 3/4", 5 1/2", 8 1/4", and 11".  Tip--when scoring a long strip, I use a metal ruler to keep the score line straight.  Corrected my original post, I had a wrong measurement!  The measurements that you see now, are correct!   PLEASE NOTE....I printed these instructions and found that the printed version retains the incorrect information!!  The 8 1/4" prints the incorrect measurement of 8 1/2"....Please change the measurement on the printed instructions.
Step 3     Lay scored cardstock on paper trimmer and cut away a 2" strip.  Save strip for later use.
Step 4     Place the 6 1/2" x 12" panel on scoreboard and score at 2 3/4"
Step 5     Cut along the shorter scored lines up to the 2 3/4" scored line.  The scissors and bonefolder are used to show where the cuts were made.
Step 6     To create a tab to hold the box together, cut a small section of the 1" margin at an angle.  To clarify this will cut away the 1" shorter piece.  As you cut the piece away, cut into the longer section at an angle to create the tab.  In the original instructions from the link above, I had a little trouble understanding what to do.  The video was helpful, but I had to make a box myself to completely get this step correct.
Step 7     Use the 2"x 12" strip to create 2 inserts for the embellishments to the box.  To do this, find the end with the 1" score.  Measure a strip of 4 3/4" including the 1"score end.  Cut.  Tip--Look at the photo and see there are now 1"folds on each end of the 4 3/4" strip.
Step 8     Cut the 4 3/4" strip into 2 pieces of 1" x 4 3/4"

Step 9     Put a strong adhesive on the short sections of the strips.  The strips will be adhered to the inside of the box.  Use a strong adhesive because these strips will be holding a large number of embellishments.  I am using Terrifically Tacky Tape. Tip--When folding all the scorelines, use a bonefolder.  This make the folds neat and sharp.
Step 10     It is time to cut the coordinating patterned paper to decorate the box.  Take a moment to look at the sample box at the top of the post.  Think about where you want to place the patterned paper.

This photo shows the 3 bottom pieces on the outside--2 1/2" x 3 1/2"
I am using Carol Wilson Fine Arts, Inc SDD102C because of the pretty pattern and especially because of the border.
Step 11     Cut 2 pieces at 2 1/2" x 6 1/4" (1 pc) white or very light to use for sentiment/signature
(1 pc) patterened paper
Step 12     Cut 6 upper pieces at 2 1/2" x 2 1/2".
I am using a lightly patterned paper, source unknown.  There is a faint border that I will incorporate.  Tip--I am using the lighter paper on top so that my embellishments will be the focus of the card, not the paper.
Everything is assembled and ready to create the card box base.
Step 13     Fold the card base.  Determine which side will be the outside and inside.  You are looking at the inside of the card base.  Notice the placement of the long patterned piece of paper.  I used regular double-sided tape to adhere the patterned paper.  However, I used the Tacky Tape on the tab.  Look carefully where the Tacky Tape has been applied, it is on the outside of the card base.
Step 14     Inside card base.  I have added the 3 squares at the top of the card.  Please note that I have positioned the border at the top.  When the box is made, these square pieces will  be the pieces that fold back.  I want the border facing out.  Refer to box photo at top, if needed.  Please notice that you do not see the Tacky Tape on the tab.  That is because the tape was applied to the front of the tab!
Step 15     Turn the card base over and adhere the patterned paper and sentiment/signature panel.
Tip--If you plan to stamp/decorate the plain panel, this could be done before attaching it to the card base.  I chose to cut an additional piece, stamp, decorate, and then adhere it over the original panel.
Step 16     Fold and create the card box base.  It should look like the photo.
Step 17    Adhere the strips to the inside of the box.  Note the placement of the strips.  Place the 1" tabs against the front and back of the box.  This provides the center sections for embellishments.

EDITED (this section was added after my original post)....I wanted more area than the two strips to add embellishments.  So I cut the two strips in half, trim the tabs, and made 4 strips.
The four strips with tape.
The extra strips allow more area to add embellishments.
Click the link to see the Card-in-a-Box that I made using the four strips!

Back to the original post!
Step 18     It is time to decorate your Card-in-a-Box!  Have fun expressing your creativity!
These embellishments were in my crafting stash!  I have lots of flowers, all kinds of flowers! The rosettes were made from Tim Holtz rosette cutting dies. I used the Sizzix cutting dies Flourishes #8, #9, #10 to use as a filler after adding my embellishments.
I wanted to use these botanical stickers, but they are extremely fragile.  I solved that by carefully gluing the stem and flower together with Glossy Accents.  To make the flowers more durable, I carefully applied Glossy Accents to the tops of the flowers.  Then, used Glossy Accents to adhere the flowers to the card box.
Step 19     Create the sentiment/signature panel.  I used several techniques on this panel.  I used watercolor pencils on the image.  For all the information about this panel, please click the link...
Close up of the embellishments used on the Card-in-a-Box!  Tip--Be sure to use a strong adhesive as you apply the embellishments.  The card will be folded many times.  You don't want things to be falling off!  I used Glossy Accents on all the embellishments.  When used as a liquid glue, hold the embellishment to the surface for a few seconds.  The glue will act quickly and hold the embellishment.  Allow to dry thoroughly.  This make take an hour or more.  Depending how much glue was used.
Folded Card-in-a-Box.  The decorative trim is adhered on three sides of the box with Tacky Tape and the bow is secured with Zots.
Opposite side of the folded Card-in-a-Box.
I wanted a special way to deliver the Card-in-a-Box.  A regular envelope just didn't seem the best way.  So I decided to create a box to hold the Card-in-a-Box.  Well, this turned out to be much more difficult than the card!  To find out how I created the box, please click the link.....
I hope this tutorial has created a desire to make one of these delightful Card-in-a-Box projects!
To find out what is in the green Card-in-a-Box Box, click the link....

Thank you for visiting my blog today!
I hope you found the post informative!